Tube Cutters

TC-1550 Hi-Duty® Tube Cutter

0
Posted on: Mon, 2012-12-03 21:21   By: Imperial

For 1/8" to 1-1/8" (4 mm to 28 mm) O.D. tubing.

TC-1550 Hi-Duty® Tube Cutter
  • Lower profile swing radius – 4-1/4" max.
  • Retractable rotary style reamer – can be used right- or left-handed, and with a clockwise or counterclockwise motion for better ergonomic control.
  • Rollers feature flare cut-off groove to reduce tube loss when damaged flare is removed.
  • Lightweight die-cast solid aluminum body – lighter than similar cutters.
  • Durable low gloss black wrinkle finish for improved wear resistance.
  • Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting action and trouble-free operation.
  • Unique design eliminates spiraling for clean right angle cuts.
  • Our high precision machining and construction method permits one-piece screw-type axle for easy access to cutter wheel – no clip to lose or replace.
  • Imperial® cutter wheels are made of the highest quality wear and abrasion-resistant chromium steel and precision machined to exacting specifications for accurate cutting and long life. Each tool is supplied with a spare cutter wheel.
  • All Imperial tube cutters are 100% factory tested to ensure accurate spiral-free cutting.
  • Available in“Try Me”clamshell packaging.

 

TC-1550: For 1/8" to 1-1/8" (4 mm to 28 mm) O.D. tubing. Includes (2) S75015 general purpose cutter wheels. Length 5". Wt. 8.0 oz.

TC-1560: For 1/8”to 1-1/8”(4 mm to 28 mm) O.D. tubing. Includes (2) S75046 cutter wheels for continuous cutting of stainless steel, monel and other hard temper tubing. Length 5”. Wt. 8.0 oz.

S75015: General purpose cutter wheel.

TC-1550 Hi-Duty® Tube Cutter

Adjust-O-Matic™ Tube Cutters

0
Posted on: Wed, 2012-09-05 05:53   By: Imperial

406-FA Series Adjust-O-Matic™ Tube CuttersFor 3/8” to 2-5/8” and 2” to 4-1/8” O.D. tubing.

  • Ratchet feed mechanism speeds up cutting operation.
  • Extra wide rollers with flare cut-off groove stabilize tubing.
  • Spare cutting wheel included under handle cap.
  • Enclosed screw-type feed mechanism; lightweight aluminum alloy body.

 

206-FB : For 3/8” to 2-5/8” (10 mm to 66 mm) O.D. tubing. Includes (2) S74761 general purpose cutter wheels. Length closed 7-3/4”. Wt. 2.0 lbs.

206-FBP : Cuts schedule 40 PVC pipe up to 2”. Includes one cutter wheel for PVC S10000770 and one general purpose cutter wheel S74761.

406-FA : For 2” to 4-1/8” (51 mm to 104 mm) O.D. tubing. Includes (2) S74833 general purpose cutter wheels. Length closed 11-1/4”. Wt. 3.5 lbs.

Conforms to Federal Specification GGG-C-771d, Type II, Class I.

406-FA Series Adjust-O-Matic™ Tube Cutters

Adjust-O-Matic™ Tube Cutters

“IMP”® Mini Tube Cutters

0
Posted on: Wed, 2012-09-05 05:29   By: Imperial

TC-1050 Series “IMP”® Mini Tube CuttersFor 1/8” to 5/8”, 3/16” to 7/8” and 1/8” to 1-1/8” O.D. tubing.

  • Big capacity, small size tube cutters designed for use in tight quarters where other cutters won’t fit.
  • Enclosed feed screw minimizes contamination assuring continued smooth operation.
  • Corrosion-resistant steel rollers positioned at bottom of cutter allow for easier cutter engagement on tubing and smoother cutting action.
  • All Imperial® tube cutters are 100% factory tested to ensure accurate spiral-free cutting.

 

TC-1050 : For 1/8” to 5/8” (4 mm to 15 mm) O.D. tubing. Includes (1) S32633 general purpose cutter wheel. Swing radius 1-1/4” (1-3/8” swing radius with 5/8” tube). Length 1-3/4”. Wt. 2.5 oz.

S32633 : General purpose cutter wheel for TC-1050.

S26833 : Screw for TC-1050 cutter wheel.

TC-2050 : For 3/16” to 7/8” (5 mm to 22 mm) O.D. tubing. Includes (1) S75015 general purpose cutter wheel. Swing radius 1-11/16”. Length 2-1/4”. Wt. 4.0 oz.

TC-3050 : For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing. Includes (1) S75015 general purpose cutter wheel. Swing radius 2-1/2” (2-1/16” swing radius with 1-1/8” tube). Length 3”. Wt. 7.0 oz.

S75015 : General purpose cutter wheel.

S74762 : Screw for TC-3050 cutter wheel.

“IMP”® Mini Tube Cutters

Ratcheting Tube Cutters

0
Posted on: Tue, 2012-09-04 14:11   By: Imperial

TC-3050RH Series Ratcheting Tube CuttersFor 1/8” to 5/8” and 1/8” to 1-1/8” O.D. tubing.

  • Easily completes a full revolution, maximizing leverage.
  • Cutter can easily be removed from the handle.
  • Ergonomic handle with non-slip grip.
  • 100% factory tested to ensure accurate spiral-free cutting.
  • Six independent drive pawls provide 15° arc-swing.
  • Includes (1) general purpose cutter wheel.

 

TC-1050RH : For 1/8” to 5/8” (4 mm to 15 mm) O.D. tubing. 2-Pc. set includes TC-1050 “IMP”® mini tube cutter and ratcheting handle in clamshell packaging. Length 5”. Wt. 6.0 oz.

TC-1051 : Ratcheting handle only. Length 5”. Wt. 1.5 oz.

TC-3050RH : For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing. 3-Pc. set includes TC-3050 “IMP”® tube cutter, removable deburr tool and ratcheting handle in clamshell packaging. Length 7”. Wt. 11.5 oz.

TC-3051 : Ratcheting handle and deburr tool. Length 7”. Wt. 4.0 oz.

Ratcheting Tube Cutters

Ratcheting Tube Cutters

TC-1000 Series Hi-Duty® Tube Cutters

0
Posted on: Tue, 2012-09-04 00:24   By: Bobby Bonitati

For 1/8” to 1-1/8” and 1/4” to 1-5/8” O.D. tubing.

  • Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting action and trouble free operation.
  • Unique design eliminates spiraling for clean right angle cuts. Our high precision machining and construction method permits one-piece screw-type axle for easy access to cutter wheel – no clip to lose or replace.
  • Rugged aluminum alloy body designed for handling ease. Body is hand buffed and nickel chrome plated to a high-luster finish.
  • Foldaway hardened steel reamer with turned cutting edge removes inside burrs cleanly. Filing surface removes outside burrs.
  • Rollers feature flare cut-off groove to reduce tube loss when damaged flare is removed.
  • Imperial® cutter wheels are made of the highest quality wear and abrasion-resistant chromium steel and precision machined to exacting specifications for accurate cutting and long life. Each tool is supplied with a spare cutter wheel.
  • All Imperial tube cutters are 100% factory tested to ensure accurate spiral-free cutting.

Variations and Replacement Parts

TC-1000: For 1/8”to 1-1/8”(4 mm to 28 mm) O.D. tubing. Includes (2) S75015 general purpose cutter wheels. Length 5”. Wt. 8.8 oz.

TC-1010: For 1/8”to 1-1/8”(4 mm to 28 mm) O.D. tubing. Includes (2) S75046 cutter wheels for continuous cutting of stainless steel, monel and other hard-temper tubing. Length 5”. Wt. 8.8 oz.

TC-1000 Series Hi-Duty® Tube Cutters