StrideNET

Accessories

535-C Kwik Charge®

0
Posted on: Fri, 2012-09-07 00:52   By: Imperial

Liquid Low Side Charger Provides fast, safe charge - essential for today’s blended refrigerants!

The Kwik Charge® charging unit accepts liquid refrigerant from the cylinder and discharges into low side of the system. Charging rate is up to eight times faster than vapor charging. In addition, liquid charging is required when using R-410A and other blended refrigerants. Attach the Kwik Charge device to the low side of the charging manifold. Charging hose is connected from Kwik Charge device outlet to low side of refrigeration system. Internal metering element reduces liquid flow to a level below capacity of compressor. This assures a safe, fast charge without endangering the compressor. A built-in ball check valve automatically opens when drawing a vacuum to assure rapid, unrestricted evacuation. Can be used with all fluorinated hydrocarbon refrigerant systems.

Features

• Up to 8 times faster than vapor charging.

• No need to heat refrigerant cylinder.

• Built-in check valve opens for drawing unrestricted vacuum.

• No pressure drop in cylinder.

• One charger services all units 1/2 ton or larger.

Variations and Replacement Parts

535-C Kwik Charge® charging unit 1/4” female SAE flare inlet, 1/4” male SAE flare outlet.

545-C Kwik Charge® charging unit 5/16” female SAE flare inlet, 5/16” male SAE flare outlet.

Accessories

0
Posted on: Thu, 2012-09-06 14:05   By: Imperial

 

A compressor may just have a bad electrical part. These accessories will help determine exactly what is going on.acc 

 

2601 QUIK-START

  

Quik-Start starts all single phase compressors up to 5 HP 110, 200, 277V AC. A troubleshooting

aid for determining whether fault lies with compressor or component parts.

Fusetron protects against shorts and overloads, but allows high starting load. Capacitor

leads provide means of starting split phase, capacitor start, or permanent split capacitor

compressors.

  

 

2605 TEST LEAD KIT

 

Test Lead Kit consists of 4 leads 30” long with insulated test clips in each end for

temporarily connecting relays, capacitors, etc., into a system for test purposes and has

a 6ft. heavy duty power cord with a male pIug on one end and insulated test clips on

the other. Also has a 12” power cord with a female socket on one end and insulated clips

on the other.

  

2602 QUIK-START + TEST LEAD KIT COMBO

 

Combination of Model 2601 Quik-Start and Model 2605 Test Lead Kit.

 

2136 ADAPTER CORD

ACCESSORIES